SBC comm Cordless Telephone SBC 6020 User Guide

SBC-6020  
Users Manual  
Digital Enhanced Cordless Telephone  
 
In case of difficulities, visit our service center at www.sbctelephones.com or call 800-400-5156  
Table Of Contents  
Contents  
Telephone.Operation.................................................................... 20  
Making.and.receiving.calls...................................................................20  
Out.of.range.indication........................................................................21  
Call.duration.time................................................................................21  
Answering.a.call..................................................................................22  
Repeat.one.of.the.last.10.dialed.numbers.............................................22  
Holding.with.on-hold.music.................................................................23  
Microphone.muting.............................................................................23  
Transferring.a.call.................................................................................24  
Call.conferencing.................................................................................24  
Using.the.intercom...............................................................................25  
Room.monitoring.................................................................................26  
Paging.a.handset.................................................................................27  
Call.Waiting.........................................................................................27  
Caller.ID..............................................................................................27  
Phone.book.........................................................................................28  
Caller.ID.(CID)......................................................................................32  
Voice.Mail.Waiting.Indicator.(VMWI)....................................................33  
Alarm.Clock.........................................................................................34  
Appointment.function..........................................................................35  
Deregister.the.Handset.........................................................................38  
Call.Blocking.......................................................................................38  
Factory.Reset.......................................................................................39  
Troubleshooting........................................................................... 40  
Precautions..........................................................................................41  
Specifications............................................................................... 41  
Warranty....................................................................................... 42  
FCC.Information........................................................................... 43  
Index............................................................................................. 44  
Introduction.................................................................................... 2  
Welcome...............................................................................................2  
DECT.Technology...................................................................................2  
Features................................................................................................3  
Quick.Reference............................................................................. 4  
Terminology...........................................................................................4  
Symbols.On.The.LCD..............................................................................4  
Key.Descriptions.....................................................................................4  
Parts.Checklist.......................................................................................5  
Controls.&.Functions...................................................................... 6  
Handset.and.Base.Functions.&.Controls.................................................6  
Connection.Diagram..............................................................................7  
Getting.Started.............................................................................. 8  
Powering.On.and.Off.the.Handset..........................................................8  
Access.to.Ringer.Menu...........................................................................9  
Ring.mode.setting.for.handset...............................................................9  
Volume.setting.for.handset..................................................................10  
Adjusting.the.earpiece.volume.............................................................10  
Melody.setting.for.handset...................................................................11  
Ring.mode.setting.for.base..................................................................11  
Volume.setting.for.base.......................................................................12  
Melody.setting.for.base........................................................................12  
Setting.the.date.and.the.time...............................................................13  
Setting.the.area.code...........................................................................13  
Setting.keypad.tones............................................................................14  
Setting.the.backlighting.of.LCD.display.................................................14  
Setting.the.language............................................................................14  
Prefix.Dialing.......................................................................................15  
Flash...................................................................................................16  
Inter-digit.pause..................................................................................16  
Register.to.Base...................................................................................17  
 
Welcome  
NOTE!  
Thank you for purchasing this 1.9 GHz Digital Cordless phone. Your  
phone is equipped with a fully functional phone book, alarm, caller ID,  
and the ability to use additional handsets. It has an elegant design and is  
simple to use.  
IMPORTANT: Allow  
the handsets to  
charge for at least  
12 hours before  
using the phone for  
the first time. The  
fully charged phone  
should offer 8 hours  
of continuous talk  
time.  
This users guide is designed to familiarize you with your cordless telephone.  
We strongly recommend you read the guide before using your phone.  
DECT Technology  
Your phone uses the new Digital Enhanced Cordless Telecommunications  
(DECT) Technology. This allows for better cordless communications in  
residential, corporate, and public environments.  
DECT offers higher quality speech and enhanced security. You will  
experience a low risk of radio interference because your phone will  
continually search for the best radio channels, while in standby mode and  
on a call. Phone calls will be encrypted for maximum call security. And radio  
transmission is optimized for maximum battery life. In addition, this new  
technology works well with equipment from different manufacturers, such  
as handsets.  
 
Features  
• Phone book with 100 locations (up to 15  
digits for names & 25 digits for numbers)  
• Area code  
• Base station ringer volume (9 levels)  
• Internal call between handsets while on an  
external call  
Transfer an external call to another handset  
• Conference calling  
• Incoming call waiting signal during intercom  
calls  
• Room monitoring  
• Multiple handset feature (up to 5 handsets)  
• Multiple base feature (up to 4 bases)  
• Alarm  
• Appointment (annual / monthly / daily)  
• Multi-language  
• Paging from base to handset  
• Internal antenna  
• AAA rechargeable battery  
• Battery charging time: 16 hours standard  
charging method  
• Back light (both on LCD and keypad)  
• Call timer (displays the length of communication)  
• Call blocking  
• Pre-dialing  
• Last number redial (for up to 10 numbers)  
• Hands-free in the handset with local echo  
suppression  
• Access to the functions through Soft Keys  
• Caller ID*  
• Caller ID* list : stores last 40 calls  
• Handset power off  
• Microphone mute  
• Hold music  
• Low battery warning beep  
• Battery monitoring (3 levels : empty, half, full)  
• Range of use: 300 meters outside and 50  
meters inside  
• 65,000 color LCD display  
• PABX access code  
• Battery life: about 60 hours for standby and  
8 hours for talk  
• Adjustable volume on handset receiver or speaker  
• Handset ringer melody programmable for  
internal and external calls (13 melodies)  
• Handset ringer volume programmable for  
internal and external calls (9 volume levels)  
• Base station ringer melody (9 melodies)  
*requires subscription to Caller ID service from your telephone company  
**requires subscription to Voice Mail service from your telephone company  
 
Terminology  
Standby Mode - The mode your phone is in when you’re not on a  
call. The phone is ready to accept a new action.  
Talk Mode - The mode your phone is in when you’re on a call. Some  
of the Soft Keys will not be available when in this mode.  
Soft Keys - Soft Keys appear on the LCD screen of the handsets  
directly below the LCD. The functions of these keys change based on  
the mode (standby or talk) or menu.  
Symbols On The LCD  
Key Descriptions  
Hands Free Mode  
Off-hook Mode  
Current functions & display keys  
Redial key (also Flash function)  
Battery Charge Status  
Internal Call  
Talk key (press briefly)  
Hands Free key (hold down)  
Control keys:  
Up: Caller ID List  
Down: Phone Book Menu  
External Call  
Conference Call  
Alarm or Appointment is Set  
External Ring Disabled  
Talk off key or one menu level back  
(press briefly)  
Power on/off or Return to idle state  
(hold down)  
Internal call key (hold down * key)  
 
Parts Checklist  
2
3
4
1. This users guide  
2. Base unit  
3. Handset  
5
6
4. 2 rechargeable batteries  
5. Power adapter  
6. Telephone line cord  
 
Handset and Base Functions & Controls  
1. Ear piece (speaker)  
2. LCD  
3. Navigation Key Up  
4. Soft Key 1  
5. Soft Key 2  
6. Talk On  
7. Talk Off  
1
2
8. Navigation Key Down  
9. Number Keys  
10. * Key (Press and hold for Internal Call)  
11. Microphone  
12. Page handset(s)  
13. Charging LED  
14. Visual Ringer LED  
3
4
6
5
7
8
9
12  
10  
11  
13  
14  
 
Connection Diagram  
 
Getting Started  
Powering On and Off the Handset  
Power Off  
To turn off the handset:  
1. Press the  
key for 2 seconds.  
After the validation melody, the handset will be switched off.  
Power On  
To turn on the handset:  
1. Press the  
key while in the power off state.  
The handset will turn on. It will search for the base station and the  
handset LCD will display “Searching”. After locating the base, the  
initial screen is displayed on the handset LCD.  
 
Access to Ringer Menu  
You can customize the ring tone you hear for incoming calls through  
the handset and the base.  
1. Press the Menu key (Soft Key 1  
). Choose the “Ringer” Menu  
using the or keys.  
2. Press the Back key (Soft Key 2  
) or the key to return to the  
previous menu. And press the key to return to standby mode.  
Ring mode setting for handset  
1. Go to the “Ringer” menu. Press the OK key (Soft Key 1  
2. Choose “Incoming Call”. Press the OK key (Soft Key 1  
3. Choose “Ring Mode”. Press the OK key (Soft Key 1  
).  
).  
).  
4. Browse through the ring modes. Press the OK key (Soft Key 1  
)
to select the desired ring mode:  
a. “Standard”: Standard Ring mode.  
b. “Disable”: Ring tone is disabled.  
c. “Ring After #”: Select from 1 ring to 4 rings  
5. Press the OK key (Soft Key 1  
). The ring tone you selected is  
enabled.  
 
Volume setting for handset  
You also can set the volume for the melody.  
1. Go to “Ringer” menu. Press the OK key (Soft Key 1  
2. Choose “Incoming Call”. Press the OK key (Soft Key 1  
).  
).  
). The display  
3. Choose “Volume”. Press the OK key (Soft Key 1  
will show the previously stored volume level.  
4. Choose from volumes 1 through 9. Press the OK key (Soft Key 1  
)
to confirm.  
Adjusting the earpiece volume  
You can change the listening volume at any point during a conversation.  
While on a phone call:  
1. Press the Options key (Soft Key 1  
). Then, use the or keys to  
choose “Ear Volume”.  
2. Press the OK key (Soft Key 1  
3. Press the or keys to choose the appropriate ear volume: 1-5.  
4. Press the OK key (Soft Key 1 ).  
).  
ꢀ0  
 
Melody setting for handset  
You can choose from 13 different ring melodies for the handset.  
1. Go to the “Ringer” menu. Press the OK key (Soft Key 1  
2. Choose “Incoming Call”. Press the OK key (Soft Key 1  
).  
).  
3. Choose “Melody”. Press the OK key (Soft Key 1  
).  
4. Choose from melodies 1 through 13. Press the OK key (Soft Key 1  
) to confirm.  
Ring mode setting for base  
1. Go to the “Base Settings” menu. Press the OK key (Soft Key 1  
2. Choose “Base Ring Tone”. Press the OK key (Soft Key 1 ).  
3. Choose “Ring Mode”. Press the OK key (Soft Key 1 ).  
).  
4. Browse through the ring modes. Press the OK key (Soft Key 1  
)
to select the desired ring mode:  
a. “Standard”: Standard Ring mode.  
b. “Disable”: Ring tone is disabled.  
c. “Ring After #”: Select from 1 ring to 4 rings  
5. Press the OK key (Soft Key 1  
). The ring tone you selected is  
enabled.  
ꢀꢀ  
 
Volume setting for base  
You also can set the volume for the melody.  
1. Go to “Base Settings” menu. Press the OK key (Soft Key 1  
2. Choose “Base Ring Tone”. Press the OK key (Soft Key 1  
).  
).  
). The display  
3. Choose “Volume”. Press the OK key (Soft Key 1  
will show the previously stored volume level.  
4. Choose from volumes 1 through 9. Press the OK key (Soft Key 1  
)
to confirm.  
Melody setting for base  
You can choose from 9 different ring melodies.  
1. Go to the “Base Settings” menu. Press the OK key (Soft Key 1  
).  
2. Choose “Base Ring Tone”. Press the OK key (Soft Key 1  
3. Choose “Melody”. Press the OK key (Soft Key 1 ).  
).  
4. Choose from melodies 1 through 9. Press the OK key (Soft Key 1  
) to confirm.  
ꢀꢁ  
 
Setting the date and the time  
You can set the date and time. The clock is in 24-hour mode.  
1. Go to the “HS Settings” Menu. Choose “Set Clock”.  
2. Press the OK key (Soft Key 1  
3. Press the OK key (Soft Key 1  
4. Press the AM/PM key (Soft Key 2  
5. Press the OK key (Soft Key 1  
Setting the area code  
). Enter the month, day and year.  
). Enter the hours and minutes.  
). Choose the desired option.  
) to confirm.  
You can enter your home area code to indicate which phone numbers  
are local calls.  
1. Go to the “HS Settings” menu. Press the OK key (Soft Key 1  
).  
2. Choose “Set Area Code”. Press the OK key (Soft Key 1  
).  
3. Enter the area code. Press the OK key (Soft Key 1 ) to confirm.  
ꢀꢂ  
 
Setting keypad tones  
1. Go to the “HS Settings” menu. Press the OK key (Soft Key 1  
).  
2. Choose “Keypad Tones”. Press the OK key (Soft Key 1  
).  
3. Choose “On” to enable this function and choose “Off” to disable  
the function. Press the OK key (Soft Key 1  
).  
Setting the backlighting of LCD display  
You can choose to turn the LCD backlight on or off while in standby  
mode.  
1. Go to the “HS Settings” menu. Press the OK key (Soft Key 1  
2. Choose “Backlighting”. Press the OK key (Soft Key 1 ).  
).  
a. Choose “Standard” to turn on backlighting for 30 seconds.  
b. Choose “Enable” to always turn on backlighting.  
Setting the language  
The handset can display menus and information in either English or  
Spanish. To set the language:  
1. Go to the “HS Settings” menu. Press the OK key (Soft Key 1  
).  
2. Choose “Language”. Press the OK key (Soft Key 1  
).  
3. Choose either English or Spanish. Press the OK key (Soft Key 1  
)
to confirm.  
ꢀꢃ  
 
Prefix Dialing  
If the telephone is connected to a PABX, you can set the code to ac-  
cess an external line (usually 0 or 9). This gives the possibility to insert  
a pause between dialing the access code and the phone number.  
To enable this prefix dialing:  
1. Go to the “Base Settings” menu. Press the OK key (Soft Key 1  
2. Choose “Prefix Dialing”. Press the OK key (Soft Key 1 ).  
3. Insert the desired external access number (1 digit). Press the OK key  
(Soft Key 1 ) to confirm.  
).  
To disable prefix dialing:  
1. Go to the “Base Settings” menu. Press the OK key (Soft Key 1  
).  
)
2. Choose “Prefix Dialing”. Press the OK key (Soft Key 1  
).  
3. Delete the external access number. Press the OK key (Soft Key 1  
to confirm.  
When prefix dialing is set, the prefix automatically will be added to  
phone numbers in the Phone Book, Received Calls, and Missed Calls.  
ꢀꢄ  
 
Flash  
While on a call, you may want to transfer the call to someone else  
connected to the same PABX. This can be done by using the flash  
function.  
• Press the Flash key (Soft Key 2  
) or press and hold the # key for  
2 seconds during an external call.  
The base station will then transmit a FLASH signal to the line.  
Inter-digit pause  
Some phone numbers require you to dial additional digits a few  
seconds after entering the phone number. You can insert a 3-second  
pause while in pre-dialing mode.  
1. Enter the first set of numbers.  
2. Press the key and a “-” will be inserted. Alternatively, you can press  
the Options key (Soft Key 1  
) and choose the item “Insert Pause”.  
3. Enter the number you want to dial, and press the key to start a call.  
ꢀꢅ  
 
Register to Base  
In multi-handset mode, you may need to switch the base to which a  
handset is assigned. Up to four assignments are possible. You can set  
based selection manually or automatically.  
Register an optional handset  
1. Press and hold down the button on the base for 5 seconds or  
until the base begin to give out a confirmation tone.  
2. Go into the “HS setting” menu of the handset and press the  
or keys until the “Register to BS” is selected. Press the OK key  
(Soft Key 1  
) and select the base number (from 1 to 4) where  
the handset should be registered by using the or keys.  
3. Press the OK key (Soft Key 1 ). The handset now searches for  
NOTE!  
the base. When it finds the signal, the Base Identification Code  
is displayed.  
When registering an  
optional handset or  
registering a handset  
on a secondary base,  
you must know the  
PIN code of the base  
where the handset  
will be registered.  
4. Press the OK key (Soft Key 1  
) and insert the PIN code (default  
1590). Press the OK key (Soft Key 1  
) to confirm.  
Register a handset on a secondary base  
The procedure is the same as previously shown in “Register an  
optional handset”. At the end of this procedure, the base will  
assign the number to the handset automatically.  
If the base where you want to register a handset is a different model,  
ꢀꢆ  
 
use the instructions of this base to place it in registration mode.  
When you need to register a different handset on the base of  
your telephone, you can place it in registration mode by pressing  
and holding the key on the base for 5 seconds or until it gives  
out a confirmation tone. Then, follow the specified registration  
procedure for the other handset.  
Manual selection of a base  
This function is used to select one specific base among the ones  
to which the handset is already assigned. This selection will not  
change automatically when the handset loses synchronization with  
the base.  
1. Go to the “HS Settings” Menu and choose “Switch Base”. The  
display now shows the currently selected bases number.  
2. Use the or keys to select the base. Press the OK key (Soft  
Key 1). The handset tries to search for the selected base.  
3. Press the OK key (Soft Key 1  
) to confirm once the base is  
located.  
Automatic base search  
This function is used to enable the automatic base selection mode.  
Automatic selection means that every time the handset loses  
synchronization with the current base, it will look for another one  
automatically from its list of bases.  
ꢀꢇ  
 
Once enabled, the automatic selection remains active until the next  
manual selection or the next assignment.  
1. Go to the “HS Settings” Menu. Choose “Switch Base”. The  
display will show the current bases number.  
2. Choose “Automatic” by using the navigation key.  
3. Press the OK key (Soft Key 1  
). The handset will start the search  
for the base that has the strongest signal. Then, the handset will  
show the number of the base with the strongest signal.  
4. Press the OK key (Soft Key 1  
) to confirm.  
ꢀꢈ  
 
Telephone Operation  
Making and receiving calls  
There are two ways to make a phone call – manually or using pre-dial-  
ing mode.  
Make a call in talk mode  
1. When the handset is in standby mode, press the key and  
listen for the dial tone. Then, dial the destination phone number.  
2. During the call, you will see the call duration time on the display.  
3. To terminate the call, press the  
key.  
Make a call in pre-dialing mode  
You can enter the destination number before entering talk mode.  
In pre-dialing mode, its possible to make corrections if you enter  
an incorrect destination number. With the unit in standby mode,  
follow this procedure:  
1. Enter the destination number.  
2. Press the Delete key (Soft Key 2  
) to erase the last inserted  
number or press more than once to erase more numbers.  
3. Press the key to erase all the numbers and return to standby  
mode.  
4. Press the key to start the call.  
ꢁ0  
 
Out of range indication  
The cordless system uses special digital signal processing to ensure  
maximum range for your call. If you go out of base range during a  
conversation, the handset begins to give out an acoustic signal. To avoid  
dropping your call, approach the base until the acoustic signal ends.  
If you go out of range while in standby mode, the display will show  
“Out of Range”.  
Call duration time  
The call duration time appears on the LCD after making or receiving a  
call. This function starts 5 seconds after the beginning of a conversa-  
tion and ends 3 seconds after the call is complete. The time is shown  
in minutes and seconds (mm : ss).  
ꢁꢀ  
 
Answering a call  
When you receive an incoming call, both the base and the handset  
ring. Also, the LCD will display “External”. Press the key or the  
Accept key (Soft Key 1  
) to answer the call. To end the call, press  
the key or put the handset on the base.  
Repeat one of the last ꢀ0 dialed numbers  
The phone stores the last 10 numbers that have been dialed. To  
retrieve one of those numbers, start in standby mode:  
1. Press the Redial key (Soft Key 2  
). The display will show the last  
dialed numbers.  
2. Choose the destination number using the or keys.  
3. Press the key to start the call.  
4. Press the Options key (Soft Key 1  
). From here, you’ll have 4  
options:  
• Choose the “Details” option to see the full list of recently dialed  
numbers.  
• Choose the “Save” option to store the number to the phone book.  
• Choose the “Delete” option to delete the number from the  
Redial list.  
• Chose the “Call” option to dial.  
ꢁꢁ  
 
Holding with on-hold music  
You can place the other party on hold at any point during the call. The  
other party will hear hold music on their end.  
After placing the other party on hold, the handset LCD will display  
“Hold”. While on a phone call:  
1. Press the Options key (Soft Key 1  
) and use the or keys to  
) to return from holding mode.  
choose “Hold”.  
2. Press the OK key (Soft Key 1  
).  
3. Press the Disable key (Soft Key 2  
Microphone muting  
You can mute your end of the conversation at any point during the  
call. The other party will hear silence on their end.  
After muting the call, the handset LCD will show “Muted”. While on  
a phone call:  
1. Press the Options key (Soft Key 1  
) and use the or keys to  
) to get out of mute mode.  
choose “Mute”.  
2. Press the OK key (Soft Key 1  
).  
3. Press the Disable key (Soft Key 2  
ꢁꢂ  
 
Transferring a call  
In a multi-handset configuration, it is possible to transfer a call from  
one handset to another. To transfer an external call between handsets:  
1. Press the Option key (Soft Key 1  
2. Select the desired handsets number and press the OK key (Soft Key  
).  
) and choose “Internal Call”.  
1
3. Press the key or Accept key (Soft Key 1  
) on the called hand-  
set to answer the call.  
4. To transfer the external call, press the  
key on the calling handset.  
Call conferencing  
An external call can be conferenced with another handset during a  
conversation. The procedure is similar to that for transferring a call.  
1. Press the Option key (Soft Key 1  
2. Select the desired handsets number and press the OK key (Soft Key  
).  
) and choose “Internal Call”.  
1
3. Press the key or Accept key (Soft Key 1  
) on the called hand-  
set to answer the call.  
4. Press the Option key (Soft Key 1  
) and choose “Conference”.  
5. The external call is connected to both of the handsets and the con-  
ꢁꢃ  
 
ference conversation is enabled. The display will show:  
6. Press the  
key on one of the two handsets to transfer the call  
completely to the other handset.  
Using the intercom  
In a multi-handset configuration, it is possible to make an internal call  
between two handsets. To make an internal call:  
1. Press and hold the  
2. Select the handsets number and press the OK key (Soft Key 1  
3. The called handset begins to ring and will flash the INT icon. Press  
the key or Accept key (Soft Key 1 ) to answer.  
key.  
).  
4. Press the  
key on both of the handsets to end the conversation.  
ꢁꢄ  
 
Room monitoring  
You can monitor another room as long as two handsets are registered  
to the same base. For example, you could monitor a child by placing one  
handset in your room and another handset in the childs room.  
To enable this function:  
1. Go to the “HS Settings” menu. Press the OK key (Soft Key 1  
)
key.  
2. Choose “Room Monitor”. Press the OK key (Soft Key 1  
).  
3. Choose “On” to enable the function and choose “Off” to disable  
the function. Press the OK key (Soft Key 1 ).  
To use this function, enable the function on one handset and place it  
in another room. Try placing an internal call to that handset. To stop  
the room monitoring, press the  
key.  
ꢁꢅ  
 
Paging a handset  
If you misplace the handset, you can use the paging function to find it  
again. To use the paging function, push the button on the base. The  
handset will ring for 20 seconds. To stop the ringing, push the same  
button on the base. Or, you can press the key on the handset.  
Call Waiting  
If during an internal conversation, an external call comes in, the tele-  
phone will make an acoustic warning in the earpiece and the display will  
blink with the EXT symbol. To nish the internal conversation, press the  
key and wait for the ring. Then, press the key to answer the call.  
Caller ID  
1. To go to the Caller ID List, press the Menu key (Soft Key 1  
Choose the “Caller ID List”. Press the OK key (Soft Key 1  
see the “Caller ID List”.  
).  
) to  
2. Use the or keys to browse the list.  
3. Press the Options key (Soft Key 1  
). From here, you will have  
several options:  
a. Choose “Details” to show the date, time, and telephone num-  
ber of the call (only if this kind of information is available). The  
user can change the dial number format prior to starting a call  
by pressing the Format key.  
ꢁꢆ  
 
b. Choose “Save” to store this entry to your phone book.  
c. Choose “Delete” to delete the entry from the Caller ID list.  
d. Choose “Call” to dial the phone number.  
Phone book  
Your phone is featured with a phone book that has the capacity to store  
up to 40 different name and number entries. The phone book feature  
allows you to copy entries from one handset to another or from the base  
to the handsets without manually having to re-enter names and numbers.  
Storing an entry  
The phone has an alphanumeric phone book that can store 100  
names and numbers. Names can be up to 15 characters long and  
phone numbers can be up to 25 digits.  
Every numeric key has additional characters available which you  
can use when storing names and numbers in the phone book:  
Number of times to press the key  
KEY  
1
@
A
D
G
J
2
.
3
,
4
?
2
3
4
5
6
S
8
Z
5
1
a
d
g
j
m
7
t
6
!
7
-
8
&
Á
É
Ì
9
1
2
3
4
5
6
7
8
9
0
B
E
H
K
N
Q
U
X
_
C
F
I
b
e
h
k
n
p
u
w
$
c
f
é
i
L
O
R
V
Y
£
l
M
P
o
q
v
x
:
Ò
r
s
z
T
Ù
y
;
W
9
0
ꢁꢇ  
 
To store an entry in the phone book, start in standby mode:  
) and use the or keys to  
1. Press the Menu key (Soft Key 1  
choose the Phone Book icon. Press the or keys to choose  
“Add Entry”.  
2. Press the OK key (Soft Key 1  
).  
3. After the character insertion, press the OK key (Soft Key 1  
).  
4. During the character insertion, press the Delete key (Soft Key 2  
) to erase the last character.  
5. Press the OK key (Soft Key 1  
) to enter the telephone number.  
6. Enter the new telephone number.  
7. Press the Options key (Soft Key 1  
).  
a. Choose the “Save” item to save the entry.  
b. Choose the “VIP Ringer” item to select a ring melody. The  
phone will play this melody when someone calls from this  
phone number.  
Viewing entries  
You can also display a number from the phone book without dialing it.  
1. Press the Menu key (Soft Key 1  
) and use the or keys to  
choose the Phone Book icon. Press the OK key (Soft Key 1  
).  
2. Choose “Find”.  
ꢁꢈ  
 
3. Enter one or more characters for the entry you are trying to find.  
Press the Find key (Soft Key 1  
).  
4. Select the required entry.  
5. Press the Options key (Soft Key 1  
) and choose the “Dial  
Number”. Press the key and the number will be dialed.  
Calling an entry  
Once a name and number are saved in the phone book, you can  
search for and dial that number directly.  
1. Press the Menu key (Soft Key 1  
) and use the or keys to  
choose the Phone Book icon. Choose “Find”.  
2. Press the OK key (Soft Key 1 ).  
3. Enter the first letter of the name that you want to find. Press the  
). You will be able to see all the names  
Find key (Soft Key 1  
that have been stored in the phone book that begin with the  
letter you entered. The names will be listed in alphabetical order.  
4. Select the name that you want to dial.  
5. Press the key or the Call key (Soft Key 2  
) to dial the number.  
ꢂ0  
 
Editing an entry  
1. Press the Menu key (Soft Key 1  
) and use the or keys to  
choose the Phone Book icon and the OK key (Soft Key 1  
).  
Choose “Find”.  
2. Find the entry that you want to modify.  
3. Press the Options key (Soft Key 1  
).  
4. Choose “Edit Entry”.  
5. Press the OK key (Soft Key 1  
). Change the name, if necessary.  
). Change the telephone num-  
6. Press the OK key (Soft Key 1  
ber, if necessary.  
7. Press the Options key (Soft Key 1  
).  
8. Choose “Save” to save the entry.  
9. Choose “Modify Melody” to assign a different melody to the entry.  
10.Press the OK key (Soft Key 1  
11.Choose the melody.  
).  
12.Press the OK key (Soft Key 1  
) to save the selected melody.  
13.Choose “Save” and press the OK key (Soft Key 1  
) to save  
your changes.  
ꢂꢀ  
 
Deleting an entry  
If you enter a duplicate name and number or no longer want to  
NOTE!  
save an entry, you can delete it from the phone book.  
IMPORTANT: Once  
the phone book  
entries are deleted,  
they cannot be  
recovered.  
1. Press the Menu key (Soft Key 1  
) and use the or keys to  
choose the Phone Book icon. Choose “Delete”.  
2. Press the OK key (Soft Key 1  
3. Press the OK key (Soft Key 1  
Caller ID (CID)  
).  
) again to delete all the entries.  
Calling a Caller ID number  
1. To show the last 10 numbers that were dialed, press the Menu  
key (Soft Key 1  
List icon.  
) and use the or keys to choose the Call  
2. Choose the “Redial List”.  
3. Use the or keys to look through the redial list.  
4. Press the Options key. From here, you will have several options:  
a. Choose “Save” to store the number to the phone book.  
b. Choose “Delete” to delete the number from the redial list.  
5. Press the key to dial the phone number.  
ꢂꢁ  
 
Deleting a Caller ID number  
You can delete the names and numbers from the Caller ID, Redial,  
NOTE!  
and Missed Calls lists at any time.  
IMPORTANT: Once  
a call list deleted,  
it cannot be  
1. Press the Menu key (Soft Key 1  
) and use the or keys to  
). From here, you will have the  
choose the Call List icon.  
recovered.  
2. Choose “Delete All”.  
3. Press the OK key (Soft Key 1  
option to delete one or all of the call lists.  
a. Choose “Caller ID List” to delete the received calls list.  
b. Choose “Missed Calls” to delete the missed calls list.  
c. Choose “Redial List” to delete the dialed calls list.  
d. Choose “All Calls” to delete all 3 of the call lists (Caller ID,  
Missed, and Dialed).  
Voice Mail Waiting Indicator (VMWI)  
If you subscribe to a Voice Mail service provided by your local telephone  
company and you have a voice mail message, the display will show:  
ꢂꢂ  
 
Alarm Clock  
Setting the alarm  
You can use your handset as an alarm.  
1. To go to the Alarm menu, press the Menu key (Soft Key 1  
).  
Select “Alarm Clock”. Press the OK key (Soft Key 1  
).  
2. Choose “Alarm”. Press the OK Key (Soft Key 1  
).  
Activating the alarm clock  
Once activated, the alarm clock will ring at the same time every  
day. When the alarm is set, you will see a  
display.  
icon on the LCD  
1. Go to the “Alarm Clock” menu. Choose “On”. Press the OK  
key (Soft Key 1 ).  
2. Enter the alarm time in hours and minutes. Press the OK key  
(Soft Key 1 ) to confirm.  
Deactivating the alarm clock  
1. Go to the “Alarm Clock” Menu. Choose “Off”. Press the OK  
key (Soft Key 1  
)
Turning off the alarm call  
When the alarm clock goes off, the handset will ring and the word  
“Alarm” will blink for approximately 20 seconds. To turn it off,  
press any key on the handset.  
ꢂꢃ  
 
Appointment function  
The alarm clock also can be used to set appointments.  
Setting the appointment  
1. Go into the “Alarm Clock” menu and press the OK Key (Soft Key  
1
). Choose “Appointment”. Press the OK Key (Soft Key 1  
). “No appointment set” will appear on the LCD display.  
2. Press the Set Key (Soft Key 1  
). Choose from “Daily”,  
“Monthly”, or “Annual”.  
3. Set the date and time as appropriate:  
a. Daily: time  
b. Monthly: day and time  
c. Annual: day/month and time  
4. Press the OK Key (Soft Key 1  
).  
5. Enter the text for the appointment. (See the “Storing an Entry”  
section in “Phone Book Functions” to locate letters and other  
characters.) After inserting a character, wait a second before  
inserting the next character. Press the Delete key to erase the  
last character.  
6. Press the OK Key (Soft Key 1  
) once you have entered all of  
your text for the appointment.  
ꢂꢄ  
 
7. Press the Enable key (Soft Key 2  
) to make the appointment  
active.  
8. Press the  
key to exit the menu.  
Modifying the date of the appointment  
Once you have entered an appointment, you can change the date  
and time.  
1. Go into the “Alarm Clock” menu and press the OK key (Soft  
Key 1  
). Choose “Appointment”.  
2. Press the OK key (Soft Key 1  
). The current appointment  
setting is displayed.  
3. Press the Options key (Soft Key 1  
). Choose “Modify Date”.  
The current date and time are displayed.  
4. Change the date and time as needed. Press the OK key (Soft Key  
1
).  
Modifying the subject of the appointment  
Once you have entered an appointment, you can change the  
appointment text.  
1. Go into the “Alarm Clock” menu and press the OK key (Soft  
Key 1  
). Choose “Appointment”.  
2. Press the OK key (Soft Key 1  
). The current appointment  
setting is displayed.  
ꢂꢅ  
 
3. Press the Options key (Soft Key 1  
). Choose “Modify  
Subject”. The current subject is displayed.  
4. Change the subject as needed. Press the OK key (Soft Key 1  
).  
Deleting the appointment  
Once you have entered an appointment, you can delete it from the  
Alarm Clock memory.  
1. Go into the “Alarm Clock” menu and press the OK key (Soft  
Key 1  
). Choose “Appointment”.  
2. Press the OK key (Soft Key 1  
). The current appointment  
setting is displayed.  
3. Press the Options key (Soft Key 1  
). Choose “Delete”.  
“Delete the appointment?” is shown on the LCD display.  
4. Press the OK key (Soft Key 1  
). The current appointment  
setting is deleted.  
Viewing the subject of the appointment  
You can view the subject of an appointment that has been set.  
1. Go into the “Alarm Clock” menu and press the OK key (Soft  
Key 1  
). Choose “Appointment”.  
2. Press the OK key (Soft Key 1  
). The current appointment  
setting is displayed.  
ꢂꢆ  
 
3. Press the Options key (Soft Key 1  
4. Press the OK key (Soft Key 1  
Deregister the Handset  
). Choose “View Subject”.  
). The subject is displayed.  
You can deregister one or more handsets previously assigned to the  
same base.  
To deregister a handset:  
NOTE!  
1. Go to the “Base Settings” menu. Press the OK key (Soft Key 1  
).  
2. Choose “Deregister HS”. Press the OK key (Soft Key 1  
3. Choose the handset you would like to deregister. Press the OK  
key (Soft Key 1 ). The display will show “Deregister Handset  
n ?”, where n is the handset number.  
).  
It is not possible  
to deregister the  
handset that you  
use to perform this  
operation.  
4. Press the OK key (Soft Key 1  
) to confirm.  
Call Blocking  
You can block up to 5 locations with up to 5 digits. It is possible to  
specify the number and handset that cannot make a call to that prefix.  
1. Go to the “Base Settings” menu. Press the OK key (Soft Key 1  
).  
2. Choose “Call Blocking”. Press the OK key (Soft Key 1  
). The  
display will show “Prefix 1:_” or the stored blocking number.  
a. Note: When you delete the stored blocking number and  
ꢂꢇ  
 
press the OK key (Soft Key 1  
disabled.  
), the call blocking function is  
3. Insert the new blocked number or go to the next blocking  
location and enter a new blocked number.  
4. Press the OK key (Soft Key 1  
) to confirm. The display will  
show “Handset n”, where n is the stored handset number.  
5. Choose the handset that will be blocked from calling that prefix.  
6. Press the OK key (Soft Key 1  
) to confirm.  
The call blocking function will be enabled and it would not be  
possible to make a call to the stored, blocked number.  
Factory Reset  
The Reset operation allows the user to reset all the customized  
settings including the phone book and the received caller ID list. To  
execute the reset with the handset in standby mode:  
1. Go into the “HS Settings” menu. Press the OK key (Soft Key 1  
).  
2. Choose “Factory Reset”. Press the OK key (Soft Key 1  
). “Are  
you sure ?” is displayed on the LCD.  
3. Press the OK key (Soft Key 1  
) to confirm.  
ꢂꢈ  
 
Troubleshooting  
Problem  
Solution  
If the phone does not work,  
check all of the following:  
• Make sure the batteries are installed properly in  
the handset and that the battery plug is firmly  
clicked into place  
• Make sure the AC adapter is plugged into the  
wall and that the outlet is not controlled by a wall  
switch  
• Make sure the telephone line cord is plugged into  
the phone and into the wall jack  
• Make sure your battery is charged  
If you hear static on the line:  
• Move closer to the base  
• Move away from metal objects or electrical items  
that may cause interference  
If you cannot hear the phone  
ringing when a call comes in:  
• Check that the ringer is turned on  
• Move closer to the base  
• Phone may not be properly registered to the base.  
To re-register, see “Register to base” on page 17.  
ꢃ0  
 
Specifications  
Frequency Range  
RF Channel  
1.920 ~ 1.930GHz  
5 Channels  
20.8 dBm  
Max Output Power  
TDMA slot per frame  
Modulation  
24 slot  
GFSK  
Speech Encoding  
ADPCM (32Kbps)  
Precautions  
1. Read and understand all instructions in the users guide. Observe all  
markings on the product.  
2. Avoid using the telephone during a thunderstorm.  
3. Do not use the telephone in the vicinity of a gas leak.  
4. Do not use this product near water.  
5. If this phone does not operate normally, read the “Troubleshooting”  
section in the users guide.  
6. Replace batteries only as describe in the users guide.  
ꢃꢀ  
 
This product has a one-year over the counter warranty. For any inquiries after the  
warranty period, please contact IntelliTouch at (800) 400-5156. Hours are from 8:00  
In case of difficulties, visit our service center at  
www.sbctelephones.com or call 800-400-5156  
© 2006 Intellitouch  
All rights Reserved  
SBC is a trademark of AT&T Knowledge Ventures, L.P,  
Licensed to IntelliTouch  
Printed in China  
ꢃꢁ  
 
FCC Information  
1.This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On bottom of this equipment is a label that contains,  
among other information, a product identifier in the format US: 7TNW400BITC60202. If requested, this number must be provided to the telephone company.  
2. An applicable certification jacks Universal Service Order Code (USOC) for the equipment is provided (i,e., RJ11C) in the packaging with each piece of approved  
terminal equipment.  
3. A plug and jack used to connect this equipment to the premise wiring and telephone network must comply with the applicable FCC Part 68 rules and require-  
ments adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connect to a compatible modular  
jack that is also compliant. See installation instructions for details.  
4. The REN is used to determine the number of devices that may be connected to telephone line. Excessive RENs on a telephone line may result in the devices  
not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that  
may be connected to a line, as determined by the total RENs, contact the local telephone company. [ For products approved after July 23,2001, the REN for this  
product is part of the product identifier that has the format US: 7TNW400BITC60202. The digits represented by ## are the REN without a decimal point (e.g., 03  
is a REN of 0.3). For earlier products, the REN is separately shown on the label.]  
5. If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be  
required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a  
complaint with the FCC if you believe it is necessary.  
6. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this hap-  
pens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.  
7. Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not alternate or repair any parts of device except specified.  
8. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for  
information.  
9. Should you experience trouble with this equipment, please contact:  
IntelliTouch  
5160 Carroll Canyon Road  
San Diego, CA 92121-1775  
Customer Service: (800)296-3084 8 a.m. To 5 p.m. PST, Monday through Friday  
CAUTION:  
To maintain compliance with the FCCs RF exposure guidelines, place the base unit at least 20cm from nearby persons.  
ꢃꢂ  
 
Index  
Symbols  
E
P
W
1.9.GHz..2,.41  
earpiece..10,.27  
PABX..3,.15,.16  
Paging..3,.27  
pause..15,.16  
phone..2,.4,.40,.41  
PIN..17  
wall.jack..40  
warning..3,.27  
external..3,.15,.16,.24,.27  
A
F
AAA..3  
Accept..22,.24,.25  
access.code..3,.15  
acoustic..21,.27  
Adjustable..3  
Flash..4,.16  
frequency.range..41  
power.adapter..5  
Prefix..15,.38  
H
handset..40  
Hold..3,.23  
hours..2,.3,.13,.34  
R
Alarm..3,.4,.34,.35,.36,.37  
antenna..3  
Appointment..3,.4,.35,.36,.37  
Automatic..18,.19  
radio.channels..2  
range..21  
rechargeable..3,.5  
Redial..4,.22,.32,.33  
Register..17,.40  
Repeat..22  
I
Incoming..3,.9,.10,.11  
Inter-digit..16  
intercom..3,.25  
internal..3,.25,.26,.27  
B
backlighting..14  
base..40  
Reset..39  
Ringer..6,.9,.10,.11,.29  
ring.tone..9,.11  
batteries..40,.41  
battery..2,.3,.40,.43  
Blocking..38  
K
keypad.tones..14  
S
C
L
sensitivity..41  
signal..3,.16,.17,.19,.21  
soft.key..4  
Call.duration..21  
Caller.ID..3,.4,.27,.28,.32,.33  
Call.Waiting..27  
channels..41  
language..3,.14  
LED..6  
levels..3  
Soft.Keys..3,.4  
soft.keys..4  
M
CID..32  
standby..4,.8  
static..40  
melodies..3,.11,.12  
Microphone..3,.6,.23  
Missed..15,.33  
Mode..4,.9,.11  
mode..4  
Clock..13,.34,.35,.36,.37  
code..3,.13,.15,.17  
conferenced..24  
conferencing..24  
Connection..7,.43  
conversation..10,.21,.23,.24,.25,.27  
cord..5,.40,.43  
subject..36,.37,.38,.43  
T
Talk..4,.6  
talk..4  
Modify..31,.36,.37  
modulation..41  
monitoring..3,.26  
talk.mode..4  
telephone.line..5  
time..2  
cordless..2,.21  
N
D
Transfer..3  
Transferring..24  
Navigation.Key..6  
NiCad..5  
date..13,.27,.35,.36  
DECT..2  
V
Delete..15,.20,.22,.28,.29,.  
32,.33,.35,.37  
Deleting..32,.33,.37  
Deregister..38  
duration..20,.21  
O
Visual.Ringer..6  
VMWI..1,.33  
Options..10,.16,.22,.23,.27,.29,.  
30,.31,.32,.36,.37,.38  
ꢃꢃ  
 
 
 

PYLE Audio Stereo Amplifier PQ1000 User Guide
Ricoh All in One Printer 4506 User Guide
Roku Portable Multimedia Player Roku XD User Guide
Roland Musical Instrument Amplifier CUBE 40XL User Guide
Russell Hobbs Coffeemaker 10881 User Guide
Ryobi Drill R10511 User Guide
Ryobi Saw SC164VS User Guide
Samsung TV Receiver SBB NT User Guide
Seagate Computer Drive ST980829A User Guide
SECO LARM USA Security Camera VB HC1 User Guide